SQ BR 2000L Slimline
2 000 L · 2 285 × 700 × 1 800 mm
Colour Black
Drag to turn it. The figure beside it is 1.8 m tall.
Colours
- BlackNIGHT SKY®
- Slate GreyWOODLAND GREY®
- Basalt GreyBASALT®
- Birch GreyDUNE®
- Wallaby GreyWALLABY®
- Armour GreyWINDSPRAY®
- Gull GreySHALE GREY®
- Bush GreyBUSHLAND®
- Clay BrownJASPER®
- Gully BrownGULLY®
- Mangrove GreenMANGROVE®
- RivergumWILDERNESS®
- Mist GreenPALE EUCALYPT®
- Heritage GreenCOTTAGE GREEN®
- Smooth CreamCLASSIC CREAM®
- Merino BeigePAPERBARK®
- BeachSANDBANK®
- Wheat
- DuskEVENING HAZE®
- SandcoveCOVE®
- Beige
- Off WhiteSURFMIST®
- StoneMONUMENT®
- Mountain BlueDEEP OCEAN®
- BluestoneIRONSTONE®
- Heritage RedMANOR RED®
- Terrain RedTERRAIN®
The SQ BR 2000L is ideally suited to place against a wall of a house or to service a granny flat. The 2,000 litre capacity enables you to make use of fresh rainwater in the garden, to top up the pool or for household applications such as flushing toilets and laundries.
| Capacity | 2 000 litres |
|---|---|
| Length | 2 285 mm |
| Width | 700 mm |
| Height | 1 800 mm |
| Inlet height | 1 800 mm |
Fits a passage wider than 70 cm.
Pumps and packages for this tank
- Rain to Mains System DJ58Add to quoteRain-to-mains system for laundry and toilets in a small home or cabin.
- Rain to Mains System DJ72Add to quoteRain-to-mains system for laundry and toilet supply.
- Submersible Pump RSMP SeriesAdd to quoteSubmersible pump, listed for underground and slimline tanks.
- Garden Pump DT42Add to quotePressure pump for garden water supply and water transfer.
- Pump CoverAdd to quoteCover for an external pump.
Site preparation and installation
- Ensure that the area chosen is stable original ground and not filling soil.
- All Water Tanks R Us tanks must be on a level base of concrete 100mm thick with a minimum strength 25m.p.a. and one layer of F72 reinforcement.
- Concrete must extend a minimum of 30mm outside of the tank perimeter of the tank.
- Crusher dust may be used but must be a minimum of 75 mm thick, compacted and the outside edge must extend a minimum of 30mm outside of the tank’s perimeter with edges concreted so the tank cannot be undermined.
- All tanks come complete with a ball valve, stainless steel mesh strainer and a tank overflow fitting.
- Water Tanks R Us recommends a professional tank installer or plumber should install your tank.
- Polyethylene tanks will expand when filled. Allowance for expansion is required when plumbing work is carried out.
- Clean leaves & debris from strainer on a regular basis.
NB: we do not return tanks for incorrect size or colour.
Delivery and site preparationOther sizes in slimline tanks
Front views at one scale. This tank is marked in red.